SLG-2 StandAlone - how to configure Q2 to Pin 2 in SOPAS
Related Products
Table of Contents
In some applications, Pin2 must be re-configured. Here I will show how to do that in SOPAS by example.
For the SLG2 the Pin2 configuration is implemented in a similar style as for the NextGen_AXX sensors.
Default setting
Status of all Qint
Can be seen under "Zones / Qints".
As you see, all Qints are configured for presence detection over the whole detection range.
Status Pin2
Under "Smart Task", Pin 2 is pre-configured as a Teach-in input.
How to connect QL2 to Pin 2
Go to "Smart Task".
In the default view you will see the following:
To configure the QL2 output to Pin2 we need 2 steps:
Step 1: Click pull down "Selector 2" and select the needed Qint.
Step 2: click pull down "Pin2 configuration" and select "Switching signal QL2".
Result
Now Pin 2 is switching according to the Qint.2 setting = presence detection for the whole detection field!
sopas, ql2 to pin 2, configuration