Lector83x Firmware Releases

The Lector83x firmware file is linked to the download button of this article.

IInstallation:

Use SICK AppManager to update the firmware in your device
Do the following steps to update the firmware

1. Connect to the device

2. Make Login to Level 'service', password 'servicelevel'

3. Start the firmware download

• Import of external Handheld read results
• Automated framerate optimization
• Condition based output timing
• Full command parametrization via Profinet
• Extended command handling via Profinet
• Profinet expert parameters within the GSD

• Pharmacode support
• Matchcode teach in
• GS1 application identifier
• Digital outputs as a interface
  Controlled via Profinet
  Controlled via pluin
  Driven by system and device status
• Cybersecurity and lifecycle compliance

For Software, Software as a Service or Products containing Software, the following terms and conditions shall apply: (i) SICK’s General Terms and Conditions for the Supply of Software Products (“AVB Software SICK”, available at www.sick.com). And/or (ii) SICK’s General Terms and Conditions for Software as a Service (“AVB SaaS SICK”, available at www.sick.com).

This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modification, abridgment or translation of this document is prohibited without the express written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

© SICK AG. All rights reserved. Subject to Change without notice.

Original document:

This document is an original document of SICK AG.

About this document:

This document contains details of changes and their impacts. The respective operating instructions can be found at www.sick.com