web
You’re offline. This is a read only version of the page.
close
Support Portal

FAQ

TMS88D / TMM88D - CANopen Direct Command Example PDO 1 - 4 activated / Event-Timer based communication

Article No: KA-10083
Version: 1.0
Subject to change without notice
TMS88D / TMM88D - CANopen Direct Command Example PDO 1 - 4 activated / Event-Timer based communication with 10ms cycle
Related Products
dynamic inclination sensors
TMS/TMM88 Dynamic
inertial sensor
Attachments
PCAN_Command_TMx88D-Pro_PDO1-4_Config.xmt

Table of Contents

Via attached command example TMS88D / TMM88D PDO1 - 4 gets activated and communicated in a time based cycle of 10ms.
 Command list can be imported directly into PCAN-View, or used to build your own command sequence in your engineering tool of choice.

Command example is only valid for default Node-ID: 10 (0Ah)
Keywords:
canopen, tms88d, tmm88d, PCAN, direct command, configuration
Create request