CNS50-AZA0-S14 (1033993) (DiCoder) special encoder

The CNS50-AZA0-S14 (1033993) (DiCoder) was a special encoder with the following attributes:

• default encoder, which the special encoder is based on: CNS50-AAA011X03
• CT stator coupling
• flex strip pcb with 17pin connector insert (15pins only assembled)
• flex strip pcb with partial strengthening at the 17pin connector insert
• flex strip pcb fixed on housing with adhesive tape
• shield wire connected to pin3 (17pin connector insert)
• 2048 steps per revolution
• 3 pole pairs per revolution
• It is no more sellable
• There is no replacement available, because this encoder series is phased out. Also the replacement encoder series CFS50 is in phase out. For a replacement, please contact the motor manufacturer CT
• For further information to the CNS50 encoder series, search for "The CNS50 (DiCoder) encoder series" or article: "KA-09858" 

see also the attached data sheet