Support Portal

FAQ

Is the tracer- and shield wire electrically connected?

Article No: KA-09195
Version: 1.0
Subject to change without notice
Related Products
YF2A15-020C1BXLEAX PUR/2*0,25*0,34/VT/SH

Table of Contents

The drain wire is connected to the overall shield via the aluminium foil.
The drain wire is also crimped directly to PIN 1 in the connector head. 
The CAN standard has no shield connection to the knurled screw. 
The enclosed circuit diagram shows it again:
Keywords:
tracer, drain wire, connection
Create request