CLV82x Firmware Releases

• Pharmacode decoding is integrated
• Firmware Update via SD-Card
• Reliable reading across extreme code sizes
• For moving and dynamic applications, condition-based output e.g.  as‑soon‑as‑"condition" fulfilled output behavior.
• MatchCode Teach‑In (Static TeachIn- Dynamic TeachIn)
• GS1 Application Identifiers across 1D and 2D GS1 code types
• Digital outputs can now be:
  controlled via PROFINET
  controlled via Plug-In
  driven by system and device status
•  

• Common 1D codes incl PDF417 and Postal Codes

• CAN Primary Secondary

• Simple output format

• Matchcode via Command/Handheld + TeachIn

• Profinet for new applications incl topology detection, full GSDML configuration, and TCP/IP tunneling

• Serial Data (host) and AUX RS232/422

• Ethernet TCP/IP

• Ethernet IP

• FW Update via USB C Stick and push button

For Software, Software as a Service or Products containing Software, the following terms and conditions shall apply: (i) SICK’s General Terms and Conditions for the Supply of Software Products (“AVB Software SICK”, available at www.sick.com). And/or (ii) SICK’s General Terms and Conditions for Software as a Service (“AVB SaaS SICK”, available at www.sick.com).

This work is protected by copyright. Any rights derived from the copyright shall be reserved for SICK AG. Reproduction of this document or parts of this document is only permissible within the limits of the legal determination of Copyright Law. Any modification, abridgment or translation of this document is prohibited without the express written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

© SICK AG. All rights reserved. Subject to Change without notice.

Original document:

This document is an original document of SICK AG.

About this document:

This document contains details of changes and their impacts. The respective operating instructions can be found at www.sick.com