FAQ

Is there an overview for the needed tool to tighten the clamping ring screw from all hollow shaft encoders?

Article No: KA-10232

Version: 2.0

Subject to change without notice

Related Products

Encoder	Tool for the Clamping Ring
SFx60 DFS21 AFx60 Ethernet A3M60 DFS60 AFx60 SSI	torque wrench with TORX T10 socket
DFS60S Pro AFx60S Pro ANx58	torque wrench with TORX T20 socket
DBS36	torque wrench with Inbus Key Width 1.5 socket
DUS60 DBS60 DLS40 AHx36	torque wrench with Inbus Key Width 2 socket
ARS60 SRx50	torque wrench with Inbus Key Width 2.5 socket
DGS80	torque wrench with Inbus Key Width 3 socket
DGS90	torque wrench with Inbus Key Width 4 socket

List last updated in August 2025

Keywords:
rotary encoders, hollow shaft encoders, blind hollow shaft, through hollow shaft, overview, characteristics, needed tool, clamping ring, clamping ring screw

Article

Article Type

Knowledge Topic

Short Description

How to mount rotary encoders with a blind or through hollow shaft?

FAQ

Motion Control Sensors

Is there an overview for the minimum and maximum drive shaft length for all blind hollow shaft encoders?

FAQ

Motion Control Sensors

Is there an overview for the minimum drive shaft length for all through hollow shaft encoders?

FAQ