Application /Product Knowledge

CDF600-EtherCAT Technical Information

Article No: KA-08387

Version: 2.0

Subject to change without notice

The technical information for the CDF600-0300 EtherCAT is attached in this article and contains everything you need to know about the CDF600-0300 EtherCAT.

Introduction

The technical information for the CDF600-0300 EtherCAT can be found in the attachments.

The technical information contains all the informations you need to know about the CDF, e.g.:

Functions of the different operating modes
Information about electrical connections and cables
How to connect different sensor to the CDF
How the CDF can be configured
Handling on PLC side
Data exchange of the CDF
Troubleshooting help

Overview table

Device connected to the CDF	Available operating mode	Connection method	ESI-File
CLV61x-65x	Proxy-Mode (recommended) & Gateway-Mode	D-sub device cable to CDF	ESI-file-CLV61x-F,CLV62x-65x-Proxy or ESI-file-CDF-Gateway
Lector620	Proxy-Mode (recommended) & Gateway-Mode	17-pin M12 to 15-pin D-Sub cable (6077431)	ESI-file-Lector620-Proxy or ESI-file-CDF-Gateway
Lector63x-65x Lector85x CLV69x	Gateway-Mode	Additional CDB650 or CDM420 required (more details in technical information document)	ESI-file-CDF-Gateway
Lector611	Gateway-Mode	Option 1: use special device cable (2127037) Option 2: additional CDB650 required (more details in technical information document)	ESI-file-CDF-Gateway
Lector621 RFH6xx RFU6xx	Gateway-Mode	17-pin M12 to 15-pin D-Sub cable (6077431)	ESI-file-CDF-Gateway
IDM Handscanner	Gateway-Mode	RS232-Adapter needed (more details in technical information document)	ESI-file-CDF-Gateway

CDF600-EtherCAT Technical Information

Related Products

Table of Contents

Introduction

Overview table

Other helpful links

Was this article helpful?

CDF600-EtherCAT Technical Information

Related Products

Table of Contents

Introduction

Overview table

Other helpful links

Thanks for your feedback!

Was this article helpful?