Mounting Rotary Encoders- Guidelines, Information & Mounting Videos

When mounting rotary encoders in application, a good mechanical knowledge is needed.

Also guidelines and information do need to be observed.

This summary gives an overview of all relevant topics and videos regarding the mounting of rotary encoders.

Please click on the desired links to get more information.

1. What mechanical interfaces are available with the rotary encoders?

1.1 What is distinctive for a rotary encoder with a servo flange?

1.2 What is distinctive for a rotary encoder with a face mount flange?

1.3 What is distinctive for a rotary encoder with a servo-/face mount flange?

1.4 What is distinctive for a rotary encoder with a square flange?

1.5 What is distinctive for a rotary encoder with a through hollow shaft?

1.6 What is distinctive for a rotary encoder with a blind hollow shaft?

2. Safety Guidlines, Activities before & after the mounting and needed Tools & Aids

2.1 What safety guidelines must be strictly followed for mounting rotary encoders?

2.2 What activities must be reviewed before and after the mounting of rotary encoders?

2.3 What tools and aids are needed to mount rotary encoders?

3. Mounting Rotary Encoders with a Servo Flange

3.1 General Information

3.1.1 What solid shaft encoders are available with a servo flange and what characteristics do they have?

3.2 Important Knowledge

3.2.1 What encoder groups are there for encoders with a servo flange regarding the centering and the servo groove width/diameter?

3.2.2 Which servo clamps can be used for which encoder? In which pitch circle diameter do the servo clamps have to be mounted?

3.2.3 What problems might arise with the mounting bell in relation to the coupling?

3.2.4 What is the maximum length that the shaft stub can be if the mounting bell is fixed directly to the application?

3.2.5 What screws are needed to mount solid shaft encoders with a servo flange?

3.3 Mounting Videos

3.3.1 How to mount rotary encoders with a servo flange using the servo clamps?

3.3.2 How to mount rotary encoders with a servo flange using the mounting bell?

3.3.3 How to mount rotary encoders with a servo flange using the half shells?

3.3.4 How to mount rotary encoders with a servo flange using the threaded holes of the encoder with & without a centering?

4. Mounting Rotary Encoders with a Face Mount Flange

4.1 General Information

4.1.1 What solid shaft encoders are available with a face mount flange and what characteristics do they have?

4.2 Important Knowledge

4.2.1 What encoder groups are there for encoders with a face mount flange regarding the centering?

Which mounting bracket can be used for which encoder?

4.2.2 What is the mounting spigot and how does it work?

4.2.3 What screws are needed to mount solid shaft encoders with a face mount flange?

4.3 Mounting Videos

4.3.1 How to mount rotary encoders with a face mount flange using mounting brackets?

4.3.2 How to mount rotary encoders with a face mount flange using own mounting brackets?

4.3.3 How to mount rotary encoders with a face mount flange using the mounting spigot?

5. Mounting rotary Encoders with a Servo-/Face Mount Flange

5.1 General Information

5.1.1 What solid shaft encoders are available with a servo-/face mount flange and what characteristics do they have?

5.2 Important Knowledge

5.2.1 What servo clamps can be used for rotary encoders with a servo-/face mount flange?

In which pitch circle diameter do the servo clamps have to be mounted?

5.2.2 Which mounting bracket can be used for which encoder with a servo-/face mount flange?

5.2.3 What screws are needed to mount solid shaft encoders with a servo-/face mount flange?

5.3 Mounting Video

5.3.1 How to mount rotary encoders with a servo-/face mount flange?

6. Mounting Rotary Encoders with a Square Flange

6.1 General Information

6.1.1 What solid shaft encoders are available with a square flange and what characteristics do they have?

6.2 Important Knowledge

6.2.1 What screws are needed to mount solid shaft encoders with a square flange?

6.3 Mounting Video

6.3.1 How to mount rotary encoders with a square flange?

7. Mounting Rotary Encoders with a Through/Blind Hollow Shaft

7.1 General Information

7.1.1 What rotary encoders are available with a with a through hollow shaft and with what shaft diameters?

7.1.2 What rotary encoders are available with a blind hollow shaft and with what shaft diameters?

7.2 Important Knowledge

7.2.1 Is there an overview for the minimum drive shaft length for all through hollow shaft encoders?

7.2.2 Is there an overview for the minimum and maximum drive shaft length for all blind hollow shaft encoders?

7.2.3 What is the recommended tolerance that the drive shaft should has to mount the hollow shaft encoders?

7.2.4 Is there an overview for the needed tool to tighten the clamping ring screw from all hollow shaft encoders?

7.2.5 Is there an overview for the tightening torque of the clamping ring screw from all hollow shaft encoders?

7.2.6 What screws and washers are needed to mount the standard stator couplings of the hollow shaft encoders?

7.3 Mounting Video

7.3.1 How to mount rotary encoders with a blind or through hollow shaft?